Physical Setup

Connect the following components to the 4Kopen board:

1. USB Keyboard
2. USB Mouse
3. HDMI Monitor / TV
4. Network
5. USB memory stick or microSD Card with the 4Kopen distribution installed
6. Serial Console (optional)
7. 12v DC

NOTE: If you are booting from a USB memory stick, then you must connect it to the USB 3.0 port.

Console Pinout

The serial console is available on the 40-pin header. The white circled pins are 0v.

The labels in the diagram below are from the board's perspective.

The details for this interface are as follows: